
Sheet Metal Stamping
Sheet metal stamping for repeat parts in volume, with in-house dies and 3 presses. ±0.1 mm tolerance. Start with laser-cut prototypes, stamp when ready.
LEADER PROTO stamps sheet metal parts for repeat and volume orders, with dies made in-house and 3 stamping presses on the floor. Parts are held to ±0.1 mm across the run. New parts usually start as laser-cut prototypes and move to stamping when volumes justify the tooling.
When stamping makes sense
Stamping trades an upfront die cost for a low unit cost and fast, repeatable production. Which route wins depends on quantity and how stable the design is:
| Laser cutting | Stamping | |
|---|---|---|
| Tooling | None | Die, made in-house |
| Best for | Prototypes, small batches, changing designs | Repeat parts in volume |
| Unit cost in volume | Higher | Lower |
| Design changes | Free — update the file | Die rework |
Tooling, made in-house
Dies are designed and made in-house — see our stamping die page — which keeps tooling cost and lead time under our control, and makes maintenance and adjustments straightforward once production is running.
Tolerances we hold
Stamped parts are held to ±0.1 mm, consistently across the run, because every part comes from the same die. First articles are inspected before the run starts.
Materials we stamp
Stainless steel, carbon steel and aluminum sheet. Surface finishing — powder coating, painting, plating, passivation and more — is done as part of the same order, after stamping and deburring.
From prototype to production
Most stamped parts do not start as stamped parts. The usual path is a laser-cut, bent prototype first; when the design is frozen and quantities grow, the die is made and production moves to the presses. Our article on going from prototype to production explains how the routes connect.
Quality, documented
Every batch is inspected before it ships, and first articles are inspected before a run starts. On request we provide FAI first-article reports, material certificates and a CofC. NDAs are signed on request, before drawings change hands.
Frequently asked questions
When is stamping cheaper than laser cutting?
When the same part repeats in volume. Laser cutting has no tooling cost, so it wins for prototypes and small batches; a stamping die is an upfront cost that pays back across a run. Send the drawing and expected quantities and we will compare both routes in the quote.
Do you make the stamping dies yourselves?
Yes. Dies are designed and made in-house, which keeps tooling cost and lead time under our control and makes die maintenance and adjustments straightforward. See our stamping die page for how tooling is handled.
What volumes suit stamping?
There is no fixed threshold — it depends on the part size, material and how many hits the die replaces. Send the drawing and your expected quantities, per order and per year, and the quote will show whether stamping or laser cutting is the better route.
Can I prototype before committing to a die?
Yes, and most customers do. The part starts as a laser-cut, bent prototype; once the design is frozen, the die is made and production moves to stamping. Our article on going from prototype to production explains the path.
What tolerance can stamping hold?
±0.1 mm, held consistently across the run because every part comes from the same die. First articles are inspected before the run starts.
What materials can you stamp?
Stainless steel, carbon steel and aluminum sheet, in the grades and thicknesses your drawing specifies.
How long does tooling take?
It depends on the complexity of the die, and it is quoted with the part — you see the tooling cost and lead time before committing to anything.
Can stamped parts be finished?
Yes. Powder coating, painting, plating, passivation and other finishes are done as part of the same order, after stamping and deburring.
How do I get a quote?
Send your drawing and expected quantities through the contact page or by email. Enquiries are answered within 8 hours and quotes within 24 hours.
What inspection documents can you provide?
Every batch is inspected before shipping, and first articles are inspected before a stamping run starts. On request we provide a first article inspection (FAI) report, material certificates and a certificate of conformance (CofC).
Can you sign an NDA?
Yes. We are happy to sign an NDA before you send drawings. Files are only used to quote and manufacture your parts.
Send a drawing — quote within 24 hours. Contact us to start.



