



Sheet Metal Bending
Sheet metal bending for enclosures, chassis and brackets on 4 press brakes. ±0.1 mm tolerance. Prototypes and small batches, quotes within 24 hours.
LEADER PROTO bends sheet metal into enclosures, chassis, covers and brackets on 4 press brakes, held to ±0.1 mm. Most of what we bend is equipment housing — cut, bent, welded and powder-coated in one order. Prototypes ship in 3–5 days; quotes are answered within 24 hours.
What we bend
Equipment enclosures, chassis, covers, mounting brackets and folded panels — the sheet metal structure of machines and instruments. Parts arrive from our own laser cutting, so the flat pattern and the bending are planned together and hole positions survive the bends where they should.
Tolerances we hold
Bent dimensions are held to ±0.1 mm. Angles and flange lengths are confirmed against your drawing at the manufacturability review, before production starts.
Design points that decide bend quality
Three things decide whether a bent part comes out right: the bend radius against the material thickness, the flange length the brake can grip, and how close holes sit to the bend line. All three are checked on every drawing. Our sheet metal design tips explain each one with the reasoning, so designs can be adjusted before they reach us.
Materials we bend
Stainless steel, carbon steel and aluminum sheet. Thick plate is part of the same work — brackets around 6 mm in carbon steel are laser-cut and bent as one job, as shown in our article on thick plate brackets.
After bending: welding and finishing
Bent parts usually continue to welding and surface finishing — powder coating, painting, plating and more — in the same order. You receive finished enclosures and assemblies, not folded blanks.
How fast we deliver
Prototype and small-batch orders typically ship in 3–5 days. Simple parts can ship within 24–48 hours, depending on complexity and finishing. Four press brakes are on the floor, so bending rarely queues.
Quality, documented
Every batch is inspected before it ships. On request we provide FAI first-article reports, material certificates and a CofC. NDAs are signed on request, before drawings change hands.
Frequently asked questions
What tolerance can sheet metal bending hold?
±0.1 mm on bent dimensions. Angles and flange lengths are confirmed against your drawing at the manufacturability review, before production.
What is the minimum bend radius?
It depends on the material and thickness — too tight a radius cracks the outside of the bend. Send the drawing and we will confirm the radius for your material, or suggest the smallest one that bends cleanly. Our sheet metal design tips cover the general rules.
Can you bend thick plate?
Yes. Thick plate brackets, including around 6 mm carbon steel, are part of our regular work — they are laser-cut first, then bent. Our article on thick plate brackets shows the process.
Do holes near a bend distort?
They can. A hole too close to the bend line stretches as the metal forms. We check hole positions at the manufacturability review and flag any that need moving before production.
Can you weld and powder-coat bent parts in the same order?
Yes. Welding, powder coating, painting and other finishes are done as part of the same order, so bent parts come back as finished enclosures or assemblies.
What materials can you bend?
Stainless steel, carbon steel and aluminum sheet, in the grades and thicknesses your drawing specifies.
How fast can I get bent parts?
Prototype and small-batch orders typically ship in 3–5 days. Simple parts can ship within 24–48 hours, depending on complexity and finishing.
How do I get a quote?
Send your drawing through the contact page or by email. Enquiries are answered within 8 hours and quotes within 24 hours. If a bend needs adjusting for manufacturability, we will flag it with the quote.
What inspection documents can you provide?
Every batch is inspected before shipping. On request we provide a first article inspection (FAI) report, material certificates and a certificate of conformance (CofC).
Can you sign an NDA?
Yes. We are happy to sign an NDA before you send drawings. Files are only used to quote and manufacture your parts.
Send a drawing — quote within 24 hours. Contact us to start.



